Our inverters for decentralized installation help you save both energy and time. The inverters do not require control cabinets. They are all modular, flexible and economical. For offset installation in the field, simply select the inverter with functions that best suit your control tasks. And we recommend gearmotors with integrated frequency inverter as a solution for direct use on the application.
Minimum effort – maximum benefit: with the decentralized MOVIFIT basic inverter. Frequency inverter with parameterizable ramps and 4 speeds. For horizontal materials handling technology.
Simple user interfaces for short installation times
MOVIFIT basic, the decentralized basic inverter for efficient materials handling technology. Less is more: we have reduced the MOVIFIT basic to include only the functions and features necessary, and its design means that it is the ideal inverter for the lower function range. The frequency inverter is available in power ranges of 0.75 kW and 1.5 kW.
Even before installing it, this basic inverter will convince you with straightforward and fast order processing. All you need to do is select the required power rating and control, AS-Interface or binary, and one of eight available unit variants. No additional consulting or project planning effort required.
Project planning, installation and startup is even easier with this member of our drive controller family. It seems only natural that we have also integrated a power bus for field installation.
Extremely short installation times? Yes! You want to reduce investment costs for your systems? This is also possible. Thanks to consistent integration of the power distribution with innovative and reliable connector technology.
The energy for AC 3 x 400 V is distributed via the FieldPower terminal from Weidmüller, which is integrated in the unit. Two sensors can be connected to the unit in addition to the drive function when using AS-Interface. These are signaled to the system controller via AS-Interface master without additional costs and the signals can then be processed in the system controller.
For field operation: MOVIMOT, the digital frequency inverter with a power range of 0.37 to 4.0 kW. Flexible application thanks to IP54 degree of protection, also optionally available in IP55, IP65 or IP66.
Standard inverter directly mounted on the motor or for mounting close to the motor
Standard inverters for direct mounting on the motor. Thanks to our modular concept, the MOVIMOT D series can be combined as standard with our DR.. series AC motors with different levels of efficiency.
Mounting close to the motor is also possible. There are different diagnostics options available. A 3 color LED signalizes operating and fault states. The inverter is equipped with a diagnostic interface, an RS-485 serial interface and much more. Our frequency inverter is flexibly available with a connection voltage of 200 V to 240 V or 380 V to 500 V.
The pluggable motor connection enables fast replacement during servicing.
Manually settable setting setpoints.
Additional mechanical protection not necessary thanks to the robust solid metal housing. Permanent IP protection of the electronics.
Through standardized fieldbus interfaces with all commercially available bus systems.
Optimized, motor-independent cooling for use in a speed range of 300 rpm to 3000 rpm.
With field distributors, rational connection of fieldbus and sensors. Directly on the motor or separately next to the drive.
Our distributor is used in systems which include the controller mounted close to the motor. Simple, standardized for up to three drives and all this individually tailored to your application.
Distributors for controlling several drives
Our MOVIFIT MC distributor in the classic function level design is a decentralized gateway for communication and energy supply. It can control up to three MOVIMOT gearmotors with inverters. Maximum flexibility for your system planning. The same drive concept covers the different mechanical specifications of the system.
The classic function level does not require any explicit operating software for startup. Simple DIP switches make the relevant settings and following this the distributor as well as the associated MOVIFIT is then immediately ready for use. The subordinate MOVIMOT is controlled via the PLC using standardized process data profiles. Our “MOVIFIT Gateway Configurator” gives you simple configuration and diagnostic options.
Our MOVIFIT MC distributor is equipped for use in the field. The high degree of protection IP65 is standard. Its robust aluminum die cast housing is divided into electronics unit (EBOX) and connection unit (ABOX). A major benefit is the closing mechanism with only one screw and the automatic unit replacement. This enables quick assembly and smooth unit replacement for servicing.
Our distributor also has a lot to offer in terms of safety. Equipped with extensive and scalable safety functions, they can be used in safety-related areas. Everything is possible, from the safe disconnection of MOVIMOT drives to the speed-dependent safety functions activated via fieldbus.
Our controller is used in systems which include the controller mounted close to the motor. Parameterize your system with up to three drives using our standardized application modules.
Controller for demanding drive tasks
Automation made easy. Implement complex drive tasks and system- specific software requirements with our controller MOVIFIT MC in the technology function level design for up to three MOVIMOT gearmotors with inverter.
Uncomplicated and consistent! The technology function level provides both the opportunity to operate standardized application modules as well as to implement your system-specific requirements through programming. MOVIFIT MC takes on the complete energy supply of the system section.
Implement application functions without any time-consuming programming in combination with our application modules.
Simple parameterization with the aid of intuitive startup wizards enables the implementation of complex motion sequences such as cam positioning for up to three MOVIMOT. Your tasks can also be freely programmed using the standard IEC 61131 languages.
Our controller MOVIFIT MC has more than just internal strengths. The high degree of protection IP65 is standard. Its robust aluminum die cast housing is divided into electronics unit (EBOX) and connection unit (ABOX). A major advantage is the closing mechanism with only one screw. This enables quick assembly and smooth unit replacement for servicing.
Our distributor also has a lot to offer in terms of safety. They are equipped with extensive and scalable safety functions and can be used in safety-related areas. Everything is possible, from the safe disconnection of MOVIMOT drives to the speed-dependent safety functions activated via fieldbus.
Our decentralized inverter is used in systems which include inverter electronics mounted close to the motor. A wide range of functions and an innovative unit design provide many time and cost benefits for installation, operation and service.
MOVIFIT FC for demanding materials handling tasks with decentralized drive concept
Drives made easy! Our decentralized standard inverter MOVIFIT FC in the classic function level design provides a wide range of drive functions. Everything is possible from simple speed control to the operation of simple lifting axes. Comprehensive safety functions and operation on virtually all common fieldbus systems for use in a broad range of applications.
Save energy and operate your plant efficiently. Combine our MOVIFIT FC with our DRU..J series (IE4 motors) energy efficient motors and an efficient brake control.
No startup is needed for simple applications. Simple DIP switches make the relevant settings following which the inverter is immediately ready for use.
It is controlled via the PLC using standardized process data profiles. Our “MOVIFIT Gateway Configurator” provides you with simple configuration and diagnostics options even for more complex applications.
Our standard inverter MOVIFIT FC has more than just internal strengths. The high degree of protection IP65 is standard. Its robust aluminum die cast housing is divided into electronics unit (EBOX) and connection unit (ABOX). A major benefit is the closing mechanism with only one screw and the automatic unit replacement. This enables quick assembly and smooth unit replacement for servicing.
Save costs and time on installation as well. The integrated T distributor for energy and communication, the integrated repair switch and digital IOs means that a wide variety of external additional components are no longer required for the installation.
The compact drive and positioning inverter saves on space and reduces the complexity of your systems. Thanks to decentralized technology, it has a high level of integration and can replace entire control cabinets in the field.
Decentralized drive inverter with positioning control makes project planning easier
Do you want to significantly reduce the complexity of your system architecture? Are you looking for a practice-oriented drive solution that takes up little space and is resistant to vibration?
In that case, the MOVIPRO SDC drive inverter with positioning control from our decentralized drive technology portfolio is the right choice for you. The compact unit provides a high level of integration and can replace entire inverter control cabinets in the field. It also has the advantage that the controller is located near the drive.
In this way, you can install autonomous drive sectors and network them with the MOVIPRO SDC.
Depending on your regional requirements, communication is possible via all common bus systems: PROFIBUS, PROFINET, DeviceNet, EtherNET/IP and MODBUS/TCP.
Conveyor systems and machines that have consistent, decentralized drive technology such as this are far superior to comparable centrally-controlled systems.
Standardized 1-axis application modules make project planning significantly easier for you. You can use them to implement speed control and positioning commands conveniently, simply and quickly at any time. There is also no need for programming because parameterization is performed by the user.
The standard control technology also ensures consistency within your system, as the flexible, field-oriented inverter can control both asynchronous and synchronous motors. Furthermore, the inverter includes local I/Os and supports various brake voltages.
Our inverter is used in systems which include inverter electronics mounted close to the motor. Parameterize standardized drive functions or program complex drive tasks.
Flexible solutions to demanding materials handling tasks with decentralized drive concept
Automation made easy! Implement demanding materials handling applications with our decentralized application inverter MOVIFIT FC in the technology function level design. The technology design provides both the opportunity to operate standardized application modules as well as to implement your system specific requirements through programming. This can be implemented both for simple speed controlled auxiliary axes through to the operation of simple hoist axes or complex conveyor axes.
Our application inverter is equipped with extensive safety functions and supports virtually all common field bus systems. Optimally equipped for a broad range of applications.
Also choose our MOVIFIT FC for energy efficiency. Combine the inverter with our DRU..J series (IE4 motors) energy efficient motors and an efficient brake control. Save energy and costs in the process.
Implement application functions without any time consuming programming in combination with our application modules. Simple parameterization with the aid of intuitive startup wizards enables the implementation of complex motion sequences such as cam positioning for up to three MOVIMOT. Your tasks can also be freely programmed using the standard IEC 61131 languages In addition, a complete range of program components is available for individual and tailored solutions. The MOVITOOLS MotionStudio enables a complete engineering concept. A tool with all the elements necessary for automation and startup of your system.
Our MOVIFIT FC inverter has more than just internal strengths. The high degree of protection IP65 is standard. Its robust aluminum die cast housing is divided into electronics unit (EBOX) and connection unit (ABOX). A major advantage is the closing mechanism with only one screw. This enables quick assembly and smooth unit replacement for servicing.
Save cost and time on installation as well. The integrated T distributor for energy and communication, the integrated repair switch and digital IOs means that a wide variety of external additional components are no longer required for the installation.
With its freely programmable drive and application inverter, MOVIPRO ADC brings your production system architecture up to date – regardless of whether you use stationary or mobile materials handling technology.
Compact and freely programmable controller for decentralized drive technology
Do your mobile and stationary materials handling systems need drive systems that are compact and resistant to vibration? Do you require perfectly synchronized multi-axis movements? Are integrated safety functions an absolute must for you?
Our decentralized MOVIPRO ADC drive inverter for application and positioning control meets all of these requirements, and more: Because it can be programmed freely (in accordance with IEC 61131-3 and PLCopen), you can implement application-specific and complex functions in a flexible way. In addition to multi-axis synchronization, precise, local coordination of multiple actuators and sensors is also possible.
With the MOVIPRO ADC drive, positioning and application controller, you can build the foundations for an open and flexible system architecture – whether you’re designing a new system or modernizing an old system. We guarantee you functional compatibility with existing control cabinet applications. When combined with our MOVITOOLS MotionStudio, you can benefit from an integrated software environment for your entire engineering process – from setup and diagnostics right through to maintenance.
The MOVIAXIS MMD60B decentralized servo inverter is especially designed for field installations and combines high overload capacity with a compact and robust design. It is the ideal solution for large systems with interlinked machines.
High-performance MOVIAXIS MMD60B decentralized servo inverter
Do your systems and interlinked machine modules extend to over ten meters or even up to several hundred meters? If so, the functionality of each of the modular system units is important for you. However, it is only possible for these individual system modules to function on a stand-alone basis and be connected via defined interfaces if this modular approach is applied to the software, low-voltage sensor technology, and low-output drives as well.
The MOVIAXIS MMD60B decentralized servo inverter addresses precisely this gap. It combines high overload capacity with a high-performance, real-time system bus connection.
Decentralized installation and the mounting of the frequency inverter close to the motor makes wiring much easier. Field installations also allow significant savings on control cabinet space. This adds up to significant savings on costs and time during installation. And the overall system is easier and faster to install – with retrofitting options possible also.